Gandhi Sagar 1,920 MW Pumped-Storage Project Advances
Madhya Pradesh Chief Minister Mohan Yadav inaugurated a unit of Greenko Group’s Gandhi Sagar Pumped Hydro Storage Project at Rampur in Neemuch district on 18 November 2026. Reports differed on whether the unit had started operating or the event marked a project milestone.
Project design and capacity
The project is planned to have 1,920 MW capacity across nine units. The state described it as India’s and Asia’s largest standalone pumped-storage project under construction. The investment is estimated at about ₹11,500 crore, with one report specifying ₹11,474 crore. Spread across about 414 hectares, the closed-loop system will use the existing Gandhi Sagar reservoir as its lower reservoir and a new upper reservoir, with 2.4 TMC of water circulating between them. It is designed for up to six hours of generation at full capacity, estimated annual generation of 3,580 million units and round-trip efficiency of about 80%.
Grid connection and schedule
The project is to connect to a 765/400 kV substation in Mandsaur district, about 60 km away. While a report before the inauguration said the first turbines were due to start in December 2026, later reports described a unit as inaugurated. The Central Electricity Authority lists December 2026 as the commissioning target; full commercial operations are targeted for June 2027.
Important Facts for Exams
- Closed-loop design: Closed-loop pumped-storage plants have no natural inflows to the upper reservoir, unlike pump-back plants, which receive some natural replenishment.
- Reversible machinery: Pumped-storage plants commonly use reversible turbine-generator assemblies, allowing the same equipment to pump water uphill and generate electricity during release.
- Power and energy sizing: Pumped-storage plants have separate power and energy sizing: turbine-generator rating sets instantaneous output, while reservoir volume and usable head determine storage duration.
- Grid-support services: Synchronous pumped-storage machines can provide rotational inertia and reactive-power support, helping stabilise grid frequency and voltage when operating in suitable modes.