Authorities Seal Shyam Metallics Plant in Sambalpur
Authorities sealed units of Shyam Metallics and Energy Limited at Pandloi in Sambalpur district’s Rengali block, Odisha, on 6 April 2026. The action followed a Central Pollution Control Board (CPCB) direction dated 30 March over alleged repeated pollution-rule violations.
Plant operations and sealing
The plant produces sponge iron and iron rods and is categorised as a highly polluting industry. Its power supply was disconnected during the operation. Officials present included representatives of the district administration and the Odisha State Pollution Control Board, Sambalpur sub-collector Pushpanjali Panda, and SDPO Tufan Bag.
Violations cited by the CPCB
The CPCB cited high particulate matter emissions, inadequate wastewater management, untreated effluent bypassing the Zero Liquid Discharge system, and hazardous waste stored in open areas. The Board had issued directions in May 2025, which the company reportedly did not comply with. A fresh inspection took place on 17 and 18 March 2026.
Important Facts for Exams
- CPCB statutory basis: CPCB was constituted under the Water (Prevention and Control of Pollution) Act, 1974, and also exercises functions under the Air Act, 1981.
- Sponge iron production: Unlike blast-furnace ironmaking, direct reduction converts iron ore to solid metallic iron below its melting point, leaving a porous product called sponge iron.
- Zero liquid discharge process: Zero liquid discharge is an operational target, not a single treatment device: recovery and reuse are combined with concentration or evaporation of residual brine.
- Particulate control mechanisms: Industrial particulate controls commonly use electrostatic precipitators or fabric filters; the former electrically charge particles, while the latter retain dust on filter media.